Passenger Amenities Guidelines Massport Room Numbering Standards Guide for Validating and Checking BIM Submittals Last Planner System Guide Massport Laser Scanning Standard Guidelines and Operating Procedure Massport Site/Civil CAD Standards
Building Information Modeling for CM at-Risk Projects Building Information Management for DBB Projects Lean Design and Construction BIM Guidelines
BIM Guidelines detailing Capital Programs BIM and CAD standards and requirements for design and construction. Please contact the Design Technologies Integration Group (DTIG) for additional information.
Capital Programs Guidelines intended to outline potential project BIM Uses and to assist the project team during BIM Execution Planning.
Document outlining Massport’s
BIM Vision for the management of MPA Infrastructure and Capital Investments. Project Controls Guidelines
Labor Rate Guidelines
Schedule Toolkit – CM@Risk Projects (Design, CTD, and Construction)
Schedule Toolkit – Lump Sum Projects (Design, CTD, and Construction)
Schedule Toolkit – Unit Price Projects (Design, CTD, and Construction)
*To obtain the .XER and .PLF files referenced in the toolkits, please reach out to Massport Project Controls.
MPA Estimating Guidelines PMWeb
PMWeb Access Request Form CAD/GIS Guidelines
Guidelines detailing Capital Programs CAD/GIS format requirements shall be coordinated with the Design Technologies Integration Group (DTIG) before every project. Please contact DTIG at
DTIG@massport.com for more information.
This Design Guide shall be used by Massport staff, tenants, third party developers, design professionals and contractors during planning, design and construction of the following projects at Logan Airport, Conley Terminal, Fish Pier, Black Falcon Cruise Terminal, or other Massport properties in South Boston.
Litigation and Legal Proceedings History RFQ/RFP Submittal Requirements
TAA requirements for BIM and VDC
Prevailing Wage Compliance
Certified Payroll Reporting
Both general contractors and subcontractors working on Massport construction contracts must comply with the Massachusetts Prevailing Wage Law. If the construction is partially or fully funded by the federal government, contractors must comply with the federal Davis-Bacon Act as well as the Massachusetts Prevailing Wage Law.
This guide describes the procedures your company needs to follow to comply with state and federal prevailing wage laws when working on a Massport construction contract as well as instructions for certified payroll reporting.
Forms for Massport-Funded Construction Contracts
General contractors and subcontractors working on Massport standard construction contracts using hourly workers are required to file Certified Payroll Reports on Massport Form CP2 to comply with the Massachusetts Prevailing Wage Law. Updated Form CP2 will also address the Workforce Utilization Report requirement, within a single report form.
General contractors and subcontractors working on Massport standard construction contracts using hourly workers are required to file the Statement of Compliance Form for certification compliance at the end of each contractor’s work on the contract.
Form for Federally-Funded Construction Contracts
General contractors and subcontractors working on Massport federally-funded construction contracts using hourly workers are required to file Certified Payroll Reports on Massport Form MWH-347A to comply with the federal Davis-Bacon Act. Updated Form MWH-347A will also address the Workforce Utilization Report requirement, within a single report form.
Request Forms in Excel Format
The guide and forms available here are in PDF format. To request forms in Excel format, send an e-mail to
firstname.lastname@example.org and include “Request for Excel Forms” in the subject line.
Sample contract that identifies contract information required.
Sample Professional Services Agreements
Massport has multiple forms of its standard agreement, depending on whether the work will be done airside or landside, and depending on the specific scope of work and the type of fee (not to exceed, lump sum, work order). All of these forms contain the same standard terms and conditions. The attached is a sample standard agreement for airside work with a not to exceed fee. If you are interested in receiving other forms of the Authority's standard agreement, please contact us.
Work Order Service No Design Language Standard Contract
Work Order Design Standard A E Contract
(Federal (DBE)) Work Order Design Standard A E Contract
Intended for use by architects, engineers, and planners working on capital projects for Massport, these standards apply to both new construction and rehabilitation projects.
Signage Standards and Guidelines
Guidelines detailing the newly adopted Authority's signage systems and design requirements at Logan Airport.
Massport Wayfinding Guideline & Sign Standards Signage Guidelines
These new signage standards and guidelines were developed over the past two years, and are recently adopted by Massport for all projects. These guidelines provide overview of the new wayfinding signage systems, design criteria, graphic standards and typical sign types that will assist designers and users to meet Massport signage requirements.
The Signage Guidelines are available in PDF format which requires Acrobat Reader.
Trench Permit Application & Supplemental Information
Massport's Comment Letter to EPA on Effluent Limitation Guidelines for Deicing Letter
Massport's Comment Letter to EPA on Effluent Limitation Guidelines for Deicing Addendum
780 CMR - 8th Edition Project Closeout Checklist
780 CMR - 8th Edition Permit Application and Submission Checklist Tenant Alterations
TAA BIM/VDC Guide BIM Direct Tenant TAA Projects Appendix A2 BIM Third Party Development Properties Appendix B2 Airport Tenant Alterations and New Construction
Real Estate Development Projects